Feb/Mar 2015

Brought to you by Sequans Communications www.sequans.com

With the introduction of a category 1 LTE chipset solution targeting ultra low-cost and low-power applications including wearables and M2M, Sequans’ Calliope LTE Platform is addressing the market for highly-cost-sensitive devices that don’t require the high throughput of its Colibri solution. This then begs the question, why is the Calliope LTE Platform timing so critical when we talk about the IoT (Internet of Things)? To get the real answer, Connected World magazine, Editorial Director, Peggy Smedley, asked LTE chipset maker Sequans Communications, Director, Marketing Communications, Kimberly Tassin, about the disruptive opportunities that lie ahead for chipmakers, and more specifically, why the timing is so critical for Sequans?

Although M2M has always been talked about as a possible application for LTE, it was once deemed to be too complex and expensive to be viable for M2M applications. Today, however things have changed. It is well accepted now that LTE is the inevitable global standard and therefore the eventual bearer for any device needing a wide-area wireless connection. LTE is about much more than high throughput—it is about spectral efficiency, longevity, scaleability, and economic advantage for operators and devicemakers. The move to LTE is unstoppable and it has now become clear that all devices for the vast Internet of Things—from the highest speed smartphone to the lowest speed M2M or wearable device—must be LTE.

This is why the 3GPPs next two releases of the LTE standard, Releases 12 and 13, specify incremental steps towards Category 0, or “Cat 0” capability, optimized for MTC (machine-type communications). Cat 0 defines a peak speed of 1 Mbps and it is being developed in response to the huge and growing demand for LTE solutions for a wide range of M2M and IoT devices that don’t require high throughput or other complex capabilities. In addition to the lower speed, Cat 0 defines narrower bandwidths and other significant reductions in complexity which reduce cost and power consumption, and it introduces coverage improvements necessary to support MTC in LTE. The objective of all this is to ensure that M2M devices and applications can run on LTE networks cost-effectively. The evolution of LTE toward Cat 0 is expected to accelerate the trend of operators to shutter 2G and 3G networks and migrate all, including M2M applications, to LTE.

The full benefits of these Cat 0 optimizations must await the completion of the Release 12 and 13 specifications. They must also await the deployment by operators of the new capabilities in their networks and their re-allocation of spectrum for MTC use. While the industry waits for this—likely until at least 2017—Sequans has introduced a Category 1 LTE chipset solution, Calliope, that specifically addresses the needs of M2M device makers for an especially low-cost solution that can be deployed now. Cat 1 (up to 10 Mbps) has been part of the earliest 3GPP LTE specifications, meaning LTE operators can deploy Cat 1 devices with no need for new network equipment or major upgrades, allowing them to manage their networks more efficiently by not allocating excessive resources to devices that don’t require high throughput. Cat 1 provides meaningful cost and power reductions vs. today’s Cat 4 and higher LTE solutions, while providing seamless coexistence with today’s network deployments. It is an important step towards the LTE-enabled Internet of Things.

With the availability of Cat 1 solutions now and Cat 0 solutions on the horizon, we see the LTE-enabled Internet of Things expanding rapidly to include a myriad of new devices and use cases. According to Analysys Mason, the availability of low-power, low-cost wireless solutions like Cat 1 (and eventually Cat 0), LTE will expand the M2M market by some 3 billion additional units over the next 10 years. (Low-powered wireless solutions have the potential to increase the M2M market by over 3 billion connections, Reports—Analysys Mason, September 2014).

The new applications for LTE in the M2M world that are enabled by Cat 1 LTE chipset solutions are numerous. They include smart watches, health monitoring devices, and other wearables that need several days of battery life, and M2M devices such as routers, utility meters, and even industrial monitoring devices that must operate for many years on a single battery.

Cat 1 LTE chipset solutions like Calliope offer device designers a basis for M2M design that is viable today and one that enables module costs to rival existing 2G and 3G solutions, while still providing all the performance, economic, and longevity advantages of LTE.

[button link="https://connectedworld.com/subscribe-connected-world/" color="default" size="small" target="_self" title="" gradient_colors="," gradient_hover_colors="," border_width="1px" border_color="" text_color="" shadow="yes" animation_type="0" animation_direction="down" animation_speed="0.1"]Subscribe Now[/button]

Gain access to Connected World magazine departments, features, and this month’s cover story!